Brocade NetIron CER 2000 Series Hardware Guide (Supporting R05.6.00) - Manual (Page 69)

Brocade NetIron CES 2000 Series and NetIron CER 2000 Series Hardware Installation Guide 59
53-1003029-02
Appendix
5
Hardware Specifications
This chapter provides the following specifications for the Brocade devices:
• “Hardware specifications”
• “Port specifications”
• “Power cords”
Hardware specifications
This section contains the following hardware specifications for the Brocade devices:
• “Power specifications”
• “Physical dimensions”
• “Operating environment”
• “Storage environment”
• “Safety agency approvals”
Power specifications
This section contains the power specifications for the Brocade devices.
Table 13 provides the minimum and maximum voltage and current ratings.
Table 14 provides the maximum power calculations.
TABLE 13 Brocade operating voltage and current
Power supply Voltage Current Inrush current
AC 100-240 VAC 6 A 30A Peak @ 25C
DC 48 VDC 15 A 25A Peak @ 25C
TABLE 14 Maximum power calculations at 100-240 VAC with two PSUs
Devices Watts BTUs per hour
Brocade NetIron CES 2000 Series 2024C-4X 200 682
Brocade NetIron CES 2000 Series 2024C-4X with
4x10G uplink installed 256 875
Brocade NetIron CES 2000 Series 2024C 120 410
Brocade NetIron CES 2000 Series 2024C with 2x10G
uplink installed 170 580
Brocade NetIron CES 2000 Series 2024F-4X 203 692