Curtain installation using windpipe brackets, Fig. 1 bottom bracket – Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 11-05 User Manual
Page 10
Part No. 4801-5138 Rev 11-05
Rollup Curtain System
Page 10
7. Curtain Installation Using Windpipe Brackets
7.1 Bottom Windpipe Brackets
Windpipe brackets are supports for wind pipes and cabling.
1.
Install first windpipe bracket on bottom stringer at one end of curtain. Fasten bracket securely with screws
provided.
2.
Over the entire length of the system, install windpipe brackets along the bottom stringer. Install windpipe
brackets 5 ft. (152 cm) O. C. (on center).
Determine where your curtain will start.
Install first bottom bracket at this point.
FIG. 1
Bottom Bracket
5 ft. (152 cm)
Bracket
Install brackets 5 ft. (152 cm)
O.C. along the bottom
stringer.
NOTE: If post is
encountered, add
post mount bracket.
Post-Mount
bracket
Post