Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 11-05 - Manual (Page 16)

Part No. 4801-5138 Rev 11-05 Rollup Curtain System Page 16
2 ft.
7.7 Installing Bottom Pipe Into Curtains
NOTE: Bottom pipe serves as drive pipe to attach motor drive.
1. Insert 1.315" (3.34 cm) O. D. pipe into bottom hem of curtains. Insert pipe into curtains for the entire
length of the system.
2. Fit fabric clips onto the bottom 1.315" (3.34 cm) pipe/curtain assembly. Install clips every 2 ft. (61 cm)
3. If installing a double stack system, repeat steps above to install second drive pipe into hem of top curtain.
FIG. 6
Bottom Rod & Fabric Clips
1.315" (3.34 cm) O.D.
GS Rod
See Parts list.
61 cm
1.315" (3.34 cm)
O. D. GS Pipe
Bottom Hem
Of Curtain