Fig. 10 attaching motor support, Fig. 9 attachment of motor mount bracket, Fig. 11 motor support arm – Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 11-05 User Manual
Page 19
Part No. 4801-5138 Rev 11-05
Rollup Curtain System
Page 19
Insert support arm/ motor
assy. into support bracket
as shown.
Hidden view showing
how bolt inserts through
holes in flanges of
bracket & support arm
3/8-16 x 3 Bolt
3/8-16
Nut Lock
IMPORTANT!
Do Not Over Tighten!
ARM MUST SWING FREELY
IMPORTANT! Attach With Curtain
On Bracket Side Of Motor.
6.
Insert end of support arm into bottom of motor mount as shown in Fig. 11. Insert bolt through
attachment hole of bracket, and through attachment hole of support arm. Tighten bolt & nut to
allow arm to swing freely.
FIG. 10
Attaching Motor
Support
7.0" (17.8cm)
1.5" (3.8 cm)
8.0"
(20.3 cm)
6.0"
(15.2 cm)
Nut
3/8-16
Hole Pattern
Washer
Motor mount
bracket
Screw
3/8-16 x 1
5.5" (14.0 cm)
FIG. 9
Attachment Of Motor
Mount Bracket
Vertical column
2.0"
(5.1 cm)
FIG. 11
Motor Support
Arm
Motor
Support
Arm
Attachment
Hole For Bolt
M8 bolt (supplied with
gear box)
Bracket