Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 11-05 User Manual
Page 9
Part No. 4801-5138 Rev 11-05
Rollup Curtain System
Page 9
6.3.2 Double Stack System Framing
Double stack framing provides for a two tier curtain system along the outside wall of building.
The curtain system attaches to horizontal stringers.
The bottom stringer should be at least 1 ft. (30 cm) above ground level.
The middle stringer must be installed at height A (see Table 1, page 1) above the top of the
bottom stringer as shown in the diagram above.
The top stringer should be installed at height B (See Table 1, page 1) above middle stringer as
shown in the diagram above.
Pocket kits are available to enclose openings.
C-channel
B
See Table 1
(Page 1)
A
See Table 1
(Page 1)
1ft (30cm)
Minimum
Top stringer
Middle stringer
Bottom stringer
C-channel
C-channel