LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 30)

Chapter 3
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 30 of 194
If the 1412i/1314i/3434i device is recognized the New Task window
(Figure 3.3) opens, where you enter the name of the new task and press
the OK soft-key. After that you can proceed to section 3.2 .
Figure 3.3 Type in the name of the new task.
If the 1412i/1314i/3434i device is NOT recognized the Communication
Error message box (Figure 3.4) will appear. Press the OK soft-key.
Figure 3.4 Communication Error message box.
If you are using the USB interface cable connection please proceed to
section 3.1.1 .
If you are using the Ethernet (TCP/IP) interface cable connection please
proceed to section 3.1.2 .
If you are using the RS-232 interface cable connection please proceed
to section 3.1.3 .