LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 41)

Chapter 3
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 41 of 194
Figure 3.20 Monitor Setup
Also select the Sample Integration Time (SIT) to be used in the
measurements and press OK.
To select different SIT’s for different gases use the Sample Integration
Time field selection and select Advanced.
A select field appears for each gas, see Figure 3.21 . Then it is possible
to define a SIT for individual gases.