LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 54)

Chapter 4
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 54 of 194
4.2.1.1 Configuration of the (Channel-View) graphical
window
In the Configuration window select if the data should be presented as
a Real Time Graph, while measurement is in progress, or Historical
Graph, see Figure 4.7.
Figure 4.7 Select if the data should be presented in real time or historic
Real Time Graph means that measurement data will be plotted as they
arrive from the Monitor.
Historical Graph means viewing of previously measured data
Select Real Time Graph and press Next to continue.