Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 34)

GPS Reference Manual
34
Errors : displays the differences between the computed local
coordinates and the known coordinates for the control point.
Note: If the Errors are larger than the measurement precision of the
instrument, you probably have a problem with your projection
solution.
Epochs : displays the number of epochs recorded since
the beginning of data collection.
Count Status : displays Measuring when we are receiving
fresh coordinates from the receiver and updating the
screen with the latest measurement.
Averaging is
displayed after you tap $FFHSW while we average the
number of epochs specified in the Epochs to Average on
Accept field on the Measure Mode Settings screen (if this
value is greater than 1). Suspended is displayed if we
are not receiving valid data from the receiver or while
you are viewing a separate screen (like GPS Status).
*36 6WDWXV : stops the epoch counter and opens the GPS
Status screen (Page R-20).
$FFHSW : writes the results to raw data and returns you
to the Control Points screen.