Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 50)

GPS Reference Manual
50
Localization Data Base
6XUYH\ 3URMHFWLRQ +RUL]RQWDO 3URMHFWLRQ 6HWXS 3LFN IURP 'DWDEDVH
The Localization Data Base screen is used to pick a localization
reference stereographic map projection zone or a solve localization
site from the database.
Data Base : is where you select which records to choose.
You can:
•
View Zones , which will display controls to pick a
localization reference stereographic map projection
zone.
•
View Sites , which will display all the localization
sites in the database.
Zone / Site : Is where you select the zone or site from the
database.
Zone Group : displays the default zone group for
localization coordinate records
Datum : displays the horizontal datum for this zone.
Geoid : displays the geoid model attached to this zone.
'HOHWH 6LWH : deletes the currently selected site or zone.
Note: Delete cannot be undone. Also, you cannot delete system
database records. If you select a protected record, you will be
prompted that the record cannot be deleted.
Solve Localization
The user interfaces for mapping plane calibration and TDS
Localization are mostly identical. TDS Localization is simply a
calibration with a default map projection, initialized for ground
measurements, instead of a user selected map projection. This
section explains how to solve a horizontal and vertical adjustment in
either
Mapping Plane or Ground - TDS Localization mode.