Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 72)

GPS Reference Manual
72
GPS Status
6XUYH\ *36 6WDWXV 
The GPS Status screen contains most of the same index card-format
screens as the RTK Status case. When in Post Processing mode, the
Post Process card replaces the Data Link card.
Post Process

The Post Process card displays information about data recording on
the receiver and information about the session in progress.
Note: Some GPS receivers monitor post processing session status
while others simply record event markers in the raw data file. If your
receiver does not monitor sessions, some fields are not displayed.
Status : displays information about the recording. It will
be one of the following values
•
No Communication : we are not receiving a
response to commands.
•
No Data : we are receiving an unknown or a bad
response to commands.
•
Recording : the receiver internal memory is
recording GPS raw data. If this receiver
monitors sessions, this field will display
: session
in progress when a session is ongoing.
•
Not Recording: the receiver internal memory is
not recording raw data.
Last Site ID : displays the Site ID of the current session if
a session is in progress. If your receiver does not monitor sessions,
the Site ID is the last Site ID sent by Survey Pro.
Interval : displays the current recording interval set in the receiver