Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 58)

GPS Reference Manual
58
Vertical Card
The Vertical card shows results of the vertical localization solution.
Status : displays the status of the current vertical
solution. This will be one of the following:
•
Control points solution : is displayed when the
parameters were calculated from the selected control
points.
•
Current vertical site : is displayed when there is a
vertical solution and Solve V was not selected on this
pass.
•
Unadjusted geoid model : is displayed when there is a
geoid model selected but no vertical adjustment.
•
No vertical site : is displayed when there is no vertical
solution and Solve V was not selected on this pass.
Slope N : displays the slope of the inclined plane along
the local north grid axis in parts per million.
Slope E : displays the slope of the inclined plane along the local east
grid axis in parts per million.
Separation : displays the separation between the inclined plane and
the local elevation.
Origin N : displays the local origin north of the inclined plane.
Origin E : displays the local origin east of the inclined plane.
$FFHSW : updates the current projection with the horizontal and
vertical solution. If you are adding a site to the map projection zone
record, you will be prompted for a name for this new site in the
coordinate system database. If your projection record is already a
site, then it is updated with the new solution.