Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 92)

GPS Reference Manual
92
Stake DTM
6WDNHRXW 6WDNH '70 
The Stake DTM routine allows you to stake an area and get cut / fill
and volume information based on a reference DTM or specified
elevation datum.
The first screen of this routine is similar to the conventional method,
except that the
%DFNVLJKW button is replaced with a 6HWXS +5 button
to configure rover antenna and the backsight information is replaced
with rover antenna height information. See the conventional
reference manual for details.
DTM GPS Shot
6WDNHRXW 6WDNH '70 6ROYH 
The DTM GPS Shot screen displays all relevant information on the
current rover position and a graphic that shows the rover location,
the occupied TIN triangle, and the rectangular DTM corners of the
DTM boundary.
Note: the DTM boundary corners and TIN triangle may
not be visible depending on the current scale of the
screen.
2&&83<,1* / 529,1* : switches from ROVING to
OCCUPYING mode. When ROVING, the receiver is in
dynamic mode and will calculate your position as you
move to the point. When
OCCUPYING, the receiver is
switched to static mode (depending on settings) and will
calculate the most precise position for the staked point.