Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 73)

Survey Menu – Post Processing
73
Remaining : displays the time remaining in the current session if a
session is in progress. If your receiver does not monitor sessions, the
Remaining field is not displayed.
Free Memory : displays the amount of memory remaining in the
receiver internal storage card.
HDOP : displays the Horizontal Dilution of Precision. It is a measure
of the geometrical quality of the solution. DOP has no units and
lower numbers indicate better solution geometry.
VDOP : displays the Vertical Dilution of Precision. It is a measure of
the geometrical quality of the solution.
Satellites Used : displays the number of satellites recording raw data.
Satellites Locked : displays the number of satellites tracked by the
receiver.
Start Static Rx
6XUYH\ 6WDUW 6WDWLF 5[ 
The Static Rx Recording screen is used to start or stop recording in a
static receiver’s internal memory and change the recording interval or
antenna height.
6WDUW 5HFRUGLQJ : Opens a file on the receiver’s internal
memory and begins recording GPS raw data for post
processing. Next, the Static Receiver Session screen is
opened (Page R-76) where you need to enter the station
information and start mark the beginning of the
occupation.
6WRS 5HFRUGLQJ : Stops recording GPS raw data for post
processing on the receiver’s internal memory and closes
the open file.
&KDQJH « : opens up the Post Process card of the Job,
Settings screen.
Rec Interval : the recording interval set on the Post
Process card of the Job, Settings screen (page R- 11).