Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 60)

GPS Reference Manual
60
6HOHFW *HRLG« : opens the Geoid Model Setup screen, where you can
select a geoid to use with the current zone, change the geoid file of the
selected geoid, or remove the geoid model from the zone.
6ROYH /RFDOL]DWLRQ« : opens the Solve Localization wizard, where the
control points can be selected and the horizontal and vertical
localization are solved.
Note: The Solve Localization screen will do any combination of
horizontal and vertical solution when launched from either the
horizontal or vertical card. For a complete description of TDS
Localization, see the section for
Horizontal Ground - Localization mode.
Geoid Model Setup
6XUYH\ 3URMHFWLRQ 9HUWLFDO 6HOHFW *HRLG 
Geoid Model : is where you select a model to use from the drop down
list.
File Name : is where you view the file header name of the displayed
.ggf file.
File : is where you view the name of the .GGF data file for
the selected geoid, or pick from a list of .GGF files if
more than one data file is found for this geoid.
5HPRYH *HRLG )URP =RQH : removes the geoid from the
current zone record.
$FFHSW : accepts any change to the
Geoid Model selection
and returns to the previous screen.
Note: The geoid for the mapping plane zone and the
ground localization zone is the same. Changes to the
geoid for one record will occur in both.