Triton RL2000 User Manual - Manual (Page 22)

18
M
ODEL
RL2000 U
SER
M
ANUAL
C
ASSETTE
C
LOSE
P
ROCEDURES
Follow Access instructions to enter M
ANAGEMENT F UNCTIONS
. Select T
ERMINAL C LOSE F UNCTIONS
. Select
C ASSETTE C LOSE
.
Select cassette(s) to Close. A check mark ( √ )
identifies which cassette(s) are selected. Press
<Enter>
.
A Close report is displayed to be printed or
saved. This operation will reset the number of bills
in the cassette(s) to ZERO (0). Press <Enter>.
Remove and Replenish the selected cassette(s).
Note: If an NMD-50 dispenser is installed, wait for the
cassettes to UNLOCK (this is done automatically).
After cassette(s) have been reinserted in the
dispenser, press <Enter>.
Note: If an NMD-50 dispenser is installed, wait for the
cassettes to LOCK (this is done automatically). Press
<Enter> if applicable.
P lace selected cassette(s) IN SERVICE. Press
<Enter>
.
Note: The NMD-50 cassettes Must be Locked
and In Service for normal operation.
Enter Cassette Quantity (number of notes, NOT
value) for the selected cassette(s). Press <Enter>
to accept entry. Repeat for each selected cassette.
A Trial Cassette Close report automatically is
displayed to be printed or saved. Print and retain a
copy for starting point reference. Press <Enter> to
return to Close functions.
Procedures for cassette replenishment are
on the following pages.