Triton RL2000 User Manual - Manual (Page 70)

G-8
A
PPENDIX
G
Replacing the battery in the T9 Keypad
NOTE: Do NOT remove the battery from the T9 EPP without FIRST connecting a new battery!!
This EPP will be permanently damaged if the battery is removed and the keypad is unpowered before
connecting a new battery.
1. Shutdown the unit with the proper shutdown procedures. Turn the power switch on the power supply
to the OFF (O) position.
2. Remove the battery cover from the EPP. Set the cover aside for reinstallation.
3. DO NOT UNPLUG CURRENT BATTERY!
Obtain a replacement battery. Plug the new battery
into the spare battery connection. The spare battery
can be ordered at www.atmgurus.com.
4. After the new battery is correctly installed,
unplug and remove the old battery.
5. Secure the new battery in the compartment and
reinstall the battery cover.