COSA Xentaur Xentaur XDTL-HT - Manual (Page 17)

User Interface
17
User Interface
The user interface consists of a graphical display, status indicators, and a keypad.
Status Indicators
There are two LED indicators between the display and keypad. The green LED is lit when power is
applied to the instrument. The red LED is lit when an error condition is detected.
Display
The XTDL-HT™ uses a high contrast OLED display. This allows both indoor and outdoor operation. The
main screen shows two measurement readings (primary and secondary), a chart, and the states of the
relays. The readings and chart are customizable via the menu system and the Modbus communication
protocol.
Primary Reading
Secondary Reading
Secondary Reading
Type
Primary Reading Type
Relay Status
Chart
In the event of a fault, the chart would be replaced with the flashing error information.
Error
Condition