COSA Xentaur Xentaur XDTL-HT - Manual (Page 55)

Index
alarm, 20, 28
analog outputs, 13, 25, 26, 27, 32, 34, 39, 45,
46
Calibrate the digital-to-analog converter, 26
Beeper, 49
chart, 18, 50
Change the chart update rate, 18
Reset the zoom, 18
Zoom in, 18
Zoom out, 18
Coil Registers, 39
contrast, 17, 49
Current Output, 25
daylight saving, 33, 51
dew point, 20, 40, 41, 47
digital inputs, 39
Discrete Input Registers, 39
display, 16, 49
Electrical Connections, 12
Enclosure dimensional drawing, 38
Enclosure Installation, 10
enclosure temperature, 20, 40, 42, 47
error, 16
Ethernet, 14, 24, 35, 48
Change IP Address, 24
external analog inputs, 20, 47
Extractive Installation, 11
gas matrix, 20, 21, 52
Holding Registers, 41
Input Registers, 40
Installation, 10
Keypad, 34
laser, 5
locked mode, 19
Main Menu, 19
Maintenance, 36
Maintenance Policy, 36
measurements, 20, 28
Change engineering unit, 21
menu, 17
administrator passcode, 19
enterring the menu, 17
user passcode, 19
Modbus, 16, 22, 25, 27, 28, 35
Change Modbusaddress, 23, 24
Modbus commands, 22
Modbus Registers, 38, 39
Modbus RTU, 7, 23
Modbus/TCP, 7, 24
Moisture Measurement, 20
optional I/O board, 20, 25, 28
Overview, 6
PID controllers, 25, 28, 31, 32, 50, 51
power connection, 13
primary reading, 16, 18, 49
readings, 18, 49
relays, 15, 20, 28, 29, 30, 32, 39, 42, 43, 44
Remote Controlled, 27, 30
Reset Alarm, 21, 28
Restoring default values, 33
RS-485, 35
sample pressure, 15, 20, 40, 41, 47
sample temperature, 20, 34, 40, 41, 47
secondary reading, 16, 18, 49
Self Cleared, 28, 29
Serial Link, 14, 48
Setting clock, 33
Spare list, 37
Specifications, 7
Startup, 15
system fault, 20, 21, 28, 39
Theory of Operation, 8
Touch Keys, 17
Troubleshooting, 34
TruTune™, 15, 20, 21, 34
Unpacking, 5
User Interface, 16
Voltage Output, 25
Warranty, 36
wavelength modulation spectroscopy, 8