Edwards – Edwards Signaling 2400 Series User Manual
Page 2
i
© Edwards
This product has been designed to meet the requirements of NFPA Standard 72, 1990 Edition;
Underwriters Laboratory, Inc., Standard 864, May 2, 1991 Edition; and Underwriters Laboratory
of Canada, Inc. Standard ULC S527. Installation in accordance with this manual, applicable
codes, and the instructions of the Authority Having Jurisdiction is mandatory.
FCC WARNING: This equipment can generate and radiate radio frequency energy. If this
equipment is not installed in accordance with this manual, it may cause interference to radio
communications. This equipment has been tested and found to comply within the limits for
Class A computing devices pursuant to Subpart J of part 15 of the FCC Rules. These rules are
designed to provide reasonable protection against such interference when this equipment is
operated in a commercial environment. Operation of this equipment in a residential environment
is likely to cause interference, in which case the user at his own expense, will be required to
take whatever measures may be required to correct the interference.
CAUTION
1.
Read and thoroughly understand this manual before proceeding to install and operate the
control panel.
2.
To ensure proper operation of the control of the panel, only those initiating, signaling, and
other devices whose compatibility with the panel has been established by Underwriters
Laboratories may be connected to the control panel. Refer to the compatability information
supplement supplied with the panel for a complete list of compatible devices.
3.
Test all installation wiring for opens, shorts or grounds and correct any fault found before
connecting wiring to the control panel.
4.
Do not connect AC or battery power until indicated.
5.
Servicing of the control panel must be performed by qualified fire alarm service
technicians only.