Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 15)

Document #50802 Rev. B 1/5/99 P/N 50802:B 15
Initial Use of PK-411UD
3.1.1 Log-in as Master
Following the Initialization window shown in Figure 3-3, or each time the Upload/Download program is run after
initialization, the window shown in Figure 3-4 will appear. The operator must type in the Last Name, the First Name
and the previously assigned password. Movement from one entry field to the next is accomplished by pressing the
Enter key, the Tab key or by using the mouse arrow to click the next field. Once the Password is keyed-in, click the
OK button or press the Enter key twice.
It should be noted that for security reasons, the password is not displayed as it is typed (asterisks appear instead).
Make certain the password is typed correctly since there is no visual confirmation. Any incorrect entries during
Log-in will result in a message window stating 'Error With Log-in'.
Following a successful Log-in, the window shown in Fig. 3-5 will be displayed.
After selecting the type of Communicator, the Main Menu window shown in Figure 4-1 will be displayed. The menu
options are grouped under the headings of Data Entry, Utilities, Communications, Setup and Secret Code. Each
menu option is described in the sequence in which it would normally be used for an initial 411UD/411UDAC Digital
Communicator upload or download.
FIGURE 3-4: Log-in
FIGURE 3-5: Communicator Selection Window