Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 28)

Customer
28 Document #50802 Rev.B 1/5/99 P/N 50802:B
A default filename appears in the text block. Note that a program file has not yet been created, only a program file-
name. The default filename may be used or a new name can be entered by highlighting the text and typing in the new
filename. A maximum of 8 characters can be entered. The .dl
1 (download) extension will be added automatically
when the filename is saved. Click the OK button to add the new filename to the database. Click the Cancel button to
prevent the addition of the filename to the database. Clicking the OK button will automatically load the factory
default program if this is the first program file being created with the PK-411UD software. The window illustrated in
Figure 5-8 will appear. Clicking the OK button in this window will create a new program file with the filename cre-
ated in Figure 5-6.
If program files have previously been created using the PK-411UD software, clicking the OK button in the window
illustrated in Figure 5-6 will cause the window shown in Figure 5-7 to be displayed. The User Default button will
appear only if a Default File has been assigned (refer to Figure 4-5 on page 19). The Current Information button
will appear only if a program file has been recalled and is currently in memory.
To create a new program file referenced by the filename created in Figure 5-6, click the Factory Default, User
Default or Current Information button. The window shown in Figure 5-8 will appear, indicating that a new
program file, for the current customer, has been created.
Clicking the OK button will cause new buttons to appear in the Customer Files window, as illustrated in Figure 5-9.
FIGURE 5-7: Existing File Selection
FIGURE 5-8: New File