Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 56)

Secret Code
56 Document #50802 Rev.B 1/5/99 P/N 50802:B
CHAPTER 7
Secret Code
The Secret Code feature provides protection from unauthorized changes to the digital communicator program. The
factory default Secret Code for all 411UD/411UDAC digital communicators is '00000000', but each communicator
should be customized by the user. The code can only be changed through an initial download to the communicator or
by using the Change Secret Code feature. Clicking the Change Secret Code button in the Main Menu window will
display the window shown in Figure 7-1.
Use this window to change the Secret Code after it has been established by an initial download. Double-click in the
white text block and type from 1 to 8 characters for the new secret code. Click the OK button to begin the Secret
Code download process. For an explanation of the download process and the windows which will appear, refer to
“Download to Communicator” on page 46. Note that only the secret code will be downloaded during this procedure.
FIGURE 7-1: Secret Code