Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 19)

Document #50802 Rev. B 1/5/99 P/N 50802:B 19
Default Directory and File
Clicking the Default Directory and File button will cause the window shown in Figure 4-5 to appear.
4.2.1 Default Directory
The field which is labeled Default Directory displays the drive and directory name, selected by the program, which
will hold files created by the program. In this example, C:\PK411UD is the default path. The drive and/or directory
name may be changed by clicking in the white text block. The window shown in Figure 4-6 will be displayed.
This window allows the user to select an alternate path for saving program files by clicking the Down Arrow symbol
in the bottom text block and selecting from the available choices. Clicking the OK button will save the selection and
close the Path Locator window, returning to the window shown in Figure 4-5.
4.2.2 Install Directory
The Install Directory field displays the drive and directory name where the PK-411UD program was installed. This
field is for informational purposes only and cannot be changed.
FIGURE 4-5: Default Selections
FIGURE 4-6: Path Locator