Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 52)

Communicator Time
52 Document #50802 Rev.B 1/5/99 P/N 50802:B
6.3 Communicator Time
The Communicator Time feature allows the Service Terminal (PC) to retrieve the digital communicator time in order
to check it for accuracy. The Service Terminal can also download the PC time to the digital communicator. Click the
Communicator Time button in the Main Menu to access the window illustrated in Figure 6-11.
The Service Terminal (PC) time is displayed in the text block to the left of this window. To download this time to the
digital communicator, click the Update Communicator from PC button. The process to download the time will be
initiated. Follow the procedure described in the section titled “Download to Communicator” on page 46.
The digital communicator time can be retrieved and displayed in the text block labeled Communicator Time to the
right of this window. To upload the time from the digital communicator, click the Update Display from
Communicator button. The process to upload the time will be initiated. Follow the procedure described in the sec-
tion titled “Upload from Communicator” on page 48.
6.4 Troubleshoot
The Troubleshoot feature allows the user to remotely view the status of the digital communicator. Clicking the Trou-
bleshoot button in the Main Menu will initiate an upload process. Follow the procedure described in the section titled
“Upload from Communicator” on page 48. The window shown in Figure 6-12 will be displayed for the 411UD and
the window shown in Figure 6-13, for the 411UDAC.
The status of each of the four input channels is shown at the top of the window. A pointer in the yellow trouble sector,
green normal sector or red alarm sector of the meter indicates the real-time status of each channel.
FIGURE 6-11: Communicator Time
FIGURE 6-12: Troubleshoot Window for the 411UD