Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 53)

Document #50802 Rev. B 1/5/99 P/N 50802:B 53
Automatic Download
A listing of each input channel and output relay function definition, as presently programmed in the digital communi-
cator, is displayed in the lower left portion of the window. The 'LEDs' located in the center of the window represent
the status of each channel and relay. These 'LEDs' indicate Normal, Active or Trouble status for each Channel.
Four system status and piezo status blocks are located in the lower right corner of the window. The top block indi-
cates 'System Normal' or 'System Trouble'. The second block indicates 'Piezo Off', 'Piezo On' or 'Piezo Silence'. The
third block indicates 'Communicator Enabled' or 'Communicator Disabled'. The fourth block indicates 'DACT Nor-
mal' or 'DACT Off Normal'.
Note that the Connection Status window, which appears while the Troubleshoot information is being uploaded (refer
to Figure 6-4), may be positioned behind the Troubleshoot window, preventing access to the Abort/Hangup/Exit but-
ton. To position the window in front, press and hold the Control (Ctrl) key and press the 'P' key on the keyboard.
Click the Exit button to return to the Main Menu window.
6.5 Automatic Download
The Automatic Download feature allows the user to download a program file or series of files to one or more digital
communicator sites. The program file and site list created in the Customer window is used as a guide for the auto-
matic download procedure. Refer to Figure 5-35, “Automatic Download,” on page 43. Click the Automatic Down-
load button to begin this process. If a 411UD is selected, the window shown in Figure 6-14 will be displayed. If an
411UDAC is selected, the window shown in Figure 6-15 will be displayed.
The Automatic Download Window is used to select the specific program fields to be reprogrammed during the auto-
matic download operation, initiate the download operation and view a log which lists the results of each download.
Specific program field verification refers to the feature which allows the Service Terminal (PC) program to compare
its download program with the current digital communicator program before the communicator is reprogrammed.
From one to all fields can be verified but only the program fields without check marks will be verified. If the pro-
gramming of any unchecked field in the download program does not match the programming in the same field in the
digital communicator program, the download operation will be terminated.
FIGURE 6-13: Troubleshoot Window for the 411UDAC