Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 27)

Document #50802 Rev. B 1/5/99 P/N 50802:B 27
Customer
5.1.2 Add Customer Site Information to Database
Information about the location of the customer's 411UD/411UDAC may also be added to the database. Click the
Add Site button to display the window shown in Figure 5-5.
The optional customer site text which is entered in each field is used as a reference only, except for the Site Phone
Number, which must be entered to allow the service terminal software to call the 411UD/411UDAC. The remaining
customer site information is not sent to the 411UD/411UDAC during programming. The Customer Name located at
the top of the window is used to reference the site being edited and cannot be changed. To enter the Site Contact
Name, highlight the text in the white block to the right of this field and then type the site contact name. Click in the
Site Street Address 1 text block or use the Tab key to move to the next field and type the appropriate information.
Continue this process until the desired information is entered in each block. Note that it is not necessary to enter text
into every text block. Click the Save Site Information button to save the information.
After clicking the Add Site button shown in Figure 5-4, the Add Site and Delete Customer buttons are replaced by
Add File and Delete Site buttons. To delete a site from the database, click the plus (+) sign located in front of the
text Communicator for to view customer names and sites in the database. To view all customers and sites, click all
plus (+) signs which appear in the Customer/Site/File block. Click the customer site to be deleted and click the
Delete Site button. A confirmation window will appear asking if you are sure that you wish to delete the site.
Clicking Yes will delete the customer site and associated program files. Clicking No will cancel the deletion.
5.1.3 Add Program File to Database
The user may now create the 411UD/411UDAC Digital Communicator program file which will be downloaded to the
communicator at the customer's site. Clicking Add File will display the window shown in Figure 5-6.
FIGURE 5-5: Customer Site Information
FIGURE 5-6: Filename