Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 32)

Customer
32 Document #50802 Rev.B 1/5/99 P/N 50802:B
Click the down arrow to the right of the Communications Format text block, to view the available format options as
illustrated in Figure 5-14. Use the scroll bar to view all formats. Clicking the desired communications format will
cause the selection to appear in the Communications Format text block.
Each 411UD/411UDAC digital communicator is assigned a unique Account Code by the Central Station, which is
used for identification purposes. Double click in the Account Code text block and enter the appropriate three or four
digit account code. The number of digits entered will match the Communications Format selection. If the communi-
cations format selected is '2, 3, 4 or 5', a three digit account code will be assigned and must be entered. If the commu-
nications format selected is '0, 1, 6, 7, 8, 9, A, B, C, D or E', a four digit account code will be assigned and must be
entered.
Double click in the 24 Hour Test Time text block and enter the time that the digital communicator will call in the 24
hour test message to the Central Station. This entry must be made in military time with valid entries being '0000'
(midnight) to '2359' (11:59 PM).
Click the down arrow to the right of the Test Time Interval text block to view the available options as illustrated in
Figure 5-15. Clicking the desired Test Time Interval will cause the selection to appear in the Test Time Interval text
block.
Select the type of phone service being used for Phone Line 1 by clicking the Touch Tone or Rotary text which is
located to the top right of the window. Refer to Figure 5-15 for the location of these selections. A dot will appear in
the white circle preceding the selected service.
If Rotary phone service has been chosen, select the Make/Break Ratio for Phone Line 1 by clicking 67/33 or 62/38.
Refer to Figure 5-15 for the location of these selections. A dot will appear in the white circle preceding the selected
ratio.
FIGURE 5-14: Communications Format
FIGURE 5-15: Test Time Interval