Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 41)

Document #50802 Rev. B 1/5/99 P/N 50802:B 41
Customer
Note that entering '0' in the Setting field will disable the selected message from being sent to the Central Station.
After completing all desired changes, click the Save button and then click the Exit button to return to the Customer
File window shown in Figure 5-33. Clicking the Exit button before the Save button will return the program to the
Customer File window without saving the entries made in the Event Codes window.
5.1.5.5 Service Terminal Programming
The Service Terminal window is used to program the service terminal (PC) phone line information. Click the Service
Terminal button to display the window shown in Figure 5-34.
The Service Terminal phone numbers are the numbers the 411UD/411UDAC digital communicator uses to contact
the service terminal (PC). Click in the far left of the Service Terminal 1 Phone Number text block. The cursor
should appear to the left of the first 'F' in the text block. Type the appropriate phone number. Each typed digit will
FIGURE 5-33: Customer Files Window - Service Terminal
FIGURE 5-34: Service Terminal Programming