Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 37)

Document #50802 Rev. B 1/5/99 P/N 50802:B 37
Customer
Begin by programming Channel 1. Click the down arrow to the right of the Channel 1 Function text block, as illus-
trated in Figure 5-25, to view the available options. Clicking the desired selection will cause it to appear in the
Function text block.
The Delay Timer text block will be enabled only if function 6, 7, 8, 9 or A is selected. A default entry of zero (0)
will not delay the reporting of these functions to the Central Station. To delay the reporting of any of these functions,
double click in the Delay Timer text block and enter a delay value of from 1 second to 179 seconds.
The programming of Channel 1 has been completed. Continue with the programming of Channels 2, 3 and 4 by
following the same procedures outlined for Channel 1.
Click the down arrow to the right of the Output Relay 1 text block, as illustrated in Figure 5-26, to see the available
options. Select one of the options displayed to program the Output Relay. Program Relay 2 in the same manner.
FIGURE 5-25: 411UDAC Channel 1 - Input/output Window
FIGURE 5-26: 411UDAC Output Relay Options