Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 26)

Customer
26 Document #50802 Rev.B 1/5/99 P/N 50802:B
Click the Add Customer button shown in Figure 5-3 to enter a new customer into the database. The blank customer
information window shown in Figure 5-4 will be displayed and will allow the entry of customer information.
The optional customer text which is entered in each field is used as a reference only. The customer information is not
sent to the 411UD/411UDAC during programming. To enter the Customer Name, highlight the text in the white
block to the right of this field and then type the customer name. Click in the Address 1 text block or use the Tab key
to move to the next field and type the appropriate information. Continue this process until the desired information is
entered in each block. Note that it is not necessary to enter text into every text block. Information is not saved until
the Save Customer button is clicked.
Note in Figure 5-4, that the Add Customer button shown in Figure 5-3, has changed to the Add Site button and the
Delete Customer button is now displayed. To delete a customer from the database, click the plus (+) sign located in
front of the text Communicator for to view customer names in the database. To view all customers, click all plus (+)
signs which appear in the Customer/Site/File block. Click the customer name to be deleted and click the Delete
Customer button. A confirmation window will appear asking if you are sure that you wish to delete the customer.
Clicking Yes will delete the customer, customer site and associated program files. Clicking No will cancel the
deletion.
FIGURE 5-4: Customer Entry window