Fire-Lite PS Tools MS-9600 - Manual (Page 81)

PS-Tools User Guide
636 Pt Addr. Panel
PS-Tools 04/2010 73
6
5. Click Clear to clear the displayed data if there are multiple lines of data to scroll through in
USB Device Attached to System.
6. Click Close to close the dialog box after you verify the connection settings between the
computer and the fire panel.
Modem Settings
To view the modem settings
1. Using the Find option, select the customer for whom the connection settings needs to be
viewed.
2. Choose Upload/Download > Connection Settings in the initial customer screen in PS-Tools.
The Connection Settings dialog box appears.
3. In Communication Mode list, select Modem. The information to view/modify the modem
settings appears in the Connection Settings dialog box.
4. In Modem Port, select the port to connect the computer to the modem.
5. Click AutoDetect to detect any modem, attached to the system. The details of the attached
modem (if any) are displayed in Modem Communication.
6. Click Clear Display to clear the displayed data if there are multiple lines of data to scroll
through in Modem Communication.
7. Type the DialPrefix, which is a number added before the Dial Number.
8. Type a test string in Test AT Command, and then click Send to check the modem connection.
9. Type the Dial Number, and then click Dial to connect to the fire panel.
10. Click Hangup to end the connection.
11. Select the Modem Type from the list. Based on the selected modem type, the Initialization
Parameter is displayed.
12. Type the Hangup String.
13. Click Initialize Modem Port to initialize the port.
14. Type a test string in Initilization Parameter.
15. Click Save Modem Settings to save the settings.
16. Click Close to close the Connection Settings dialog box.