Fire-Lite PS-Tools 5UD/10UD - Manual (Page 33)

24 5/10 Zone Panel
PS-Tools 07/2010
Configuring 5/10 Zones Fire Panel
Relay
You can configure relays for activating them for alarm and trouble conditions. To configure each
relay, select the Relay type (see
Figure 5-1 ).
Configuring Option Modules
The Option modules include the Digital Alarm Communicator/Transmitter (DACT) which is used
for communication to a central station. You can choose to enable or disable the reporting from the
option modules. The option modules report the fire alarm system status, alarm, and trouble
conditions to the central station via the public switched telephone network.
To configure the option modules
• Click Next at the lower-right corner of the Input/Output configuration pane or click
Reporting in the left pane.