Ann-s/pg, Ann-rly – Fire-Lite PS-Tools 5UD/10UD User Manual
Page 41
32
5/10 Zone Panel
PS-Tools 07/2010
Configuring 5/10 Zones Fire Panel
ANN-S/PG
The ANN-S/PG Printer Option allows you to configure the optional printer.
To configure the ANN-S/PG Printer Option
1.
Select a Parallel or Serial Port for printer connection. The type of Port selected determines
the other options available for configuration.
Figure 5-8
Configuring ANN-S/PG Option
If you select the Parallel port option, you can specify the Printer Supervision and Offline Timer
options. The Baud Rate, Parity, Data Bits, and Stop Bits options are disabled.
2.
Select Yes or No for Printer Supervision.
3.
In Offline Timer, specify a delay between 0 and 255 seconds to delay the reporting of a
printer supervision problem, as a trouble in the fire panel.
If you select the Serial port option, you can specify the Baud Rate, Parity, Data Bits, and Stop
Bits. The Printer Supervision and Offline Timer options are disabled.
1.
Select a Baud Rate of 19200, 9600, or 2400.
2.
Select between 7 or 8 Data Bits.
3.
Select an option No Parity, Even Parity, or Odd Parity for Parity.
4.
Select between 0.5, 1.0, or 2.0 Stop Bits.
ANN-RLY
ANN RLY consists of different relay types which can be programmed for different events such as
alarm, supervisory, trouble, and other event types.