About this guide, Overview of contents, Audience – Fire-Lite PS-Tools 5UD/10UD User Manual
Page 7: Assumed knowledge
About This Guide
5/10 Zone Panel
PS-Tools 07/2010
i
About This Guide
This guide includes the instructions for installing PS-Tools and describes use of PS-Tools to
configure and monitor the five or ten zone Fire Alarm Control Panel (FACP).
Overview of Contents
This document contains the following chapters and appendix:
•
Chapter 1,
, describes the installation of the PS-Tools application.
•
,
introduces PS-Tools application, and gives a functional overview
of its components.
•
Chapter 3,
, shows the steps to add and maintain the details of the
customers for the fire panel.
•
Configuring 5/10 Zones Fire Panel
, details the steps to configure the fire panel for
a customer.
•
Chapter 5,
Upload/Download Configuration Data
, presents the technique to download
configuration data to the fire panel and upload configuration data from the fire panel.
•
Chapter 6,
, depicts the process to generate the Configuration Data report.
•
Chapter 7,
, lists the events and faults that can occur in the fire panel.
•
, gives additional information about the zone types, coding selections, two stage
operation, and synchronized NAC operation.
Audience
This guide is intended for the installers and operators of PS-Tools, who are trained in configuring
and monitoring the fire panel.
Assumed Knowledge
It is assumed that you are familiar with the Microsoft Windows user interface.