Reporting, Central station – Fire-Lite PS-Tools 5UD/10UD User Manual
Page 34
PS-Tools User Guide
5/10 Zone Panel
PS-Tools 07/2010
25
Reporting
1.
Select Enable in Reporting to enable reporting from the option modules.
Figure 5-2
Configure Reporting from Option Modules
2.
Click Next to view the Central Station configuration pane. Click Previous to go back to the
Input/Output modules configuration pane.
Central Station
Program the central station to configure the option modules to enable reporting of fire alarm system
status, alarm, and trouble conditions to the central station.
To program the central station
1.
Click Next in the Option Modules pane or click Central Station in the left pane, to view the
Central Station pane.
2.
In Central Station Reporting, select the Backup Reporting option to configure the DACT
(Digital Alarm Communicator/Transmitter) to transmit reports to primary central station
and/or secondary central station as a backup or both.