Ann-bus options – Fire-Lite PS-Tools 5UD/10UD User Manual
Page 40
PS-Tools User Guide
5/10 Zone Panel
PS-Tools 07/2010
31
2.
Click Yes in ANN-BUS Enable to enable the ANN-BUS. You must enable the ANN-BUS, if
ANN devices are installed on the ANN-BUS terminals.
3.
Select the Module Type and enter the ANN-BUS Module Description.
Figure 5-7
Configuring ANN-BUS
4.
Click Next to configure the ANN-BUS Options or click ANN-BUS Option in the left pane.
5.
Click Previous to view the event codes for the NACs, System, and Upload/Download Events
in the secondary central station.
ANN-BUS Options
A variety of optional devices can be connected to the FACP ANN-BUS communication circuit. The
compatible devices include:
•
ANN-80 LCD Annunciator
•
ANN-S/PG Serial/Parallel Printer Interface Module
•
ANN-I/O LED Driver Module
•
ANN-LED Annunciator
•
ANN-RLY Relay Module