Communicator settings, Figure 5-1 – Fire-Lite PS-Tools MS-9200UDLS User Manual
Page 32
Configuring Fire Panels
24
198 Pt Addr. Panel
PS-Tools
08/2010
a.
Detectors (see
)
b.
Communicator Settings
The Digital Alarm Communicator/Transmitter (DACT) module is used to transmit system status to
central station receivers through the public switched telephone network. All circuitry and connectors
are contained on a compact module, which is located near the lower - center of the main circuit board.
In PS-Tools, you must enable the reporting from the communicator, to report the fire alarm system
status, alarm, and trouble conditions to the central station through the public switched telephone
network. The System Info -> Communicator Settings ->Central Station pane appears after you
select the configuration type.
Figure 5-1
Configure Communicator Settings