Fire-Lite PS-Tools MS-9200UDLS - Manual (Page 89)

PS-Tools User Guide
198 Pt Addr. Panel
PS-Tools 08/2010 83
3. In Communication Mode list, select Serial. The information to view/modify the serial port
settings appears in the Connection Settings dialog box.
4. Under Serial Port, select the port to connect to the computer from the Port list. The details of
the attached serial port (if any) are displayed in Communication Log.
• If you select COM1, then the following fields are set to default values under serial port
• Baud Rate is set to 19200
• Parity is set as Even
• Data Bits is set to 7
• Stop bits is set to 1
5. Click Clear Display to clear the displayed data if there are multiple lines of data to scroll
through in Communication Log.
6. Click Close to close the Connection Settings dialog box