HT instruments MACROTEST 5035 - Manual (Page 56)

MACROTEST 5035
EN - 55
5. OPERATIONS WITH MEMORY
5.1. SAVING MEASUREMENTS
If the results relative to the tests effected are to be stored you can proceed as follows:
1. Press
the
SAVE key once.
If the memory of the instrument is not
empty it displays the screen alongside.
MEM
3
Pla 02
2. Use
the U
L
▼, S▲s keys to increase or diminish the value of the PLA
parameter to be related to the measurement which is to be saved. This
parameter helps the operator to classify the tests effected.
Example: if the tests are to be carried out in a building, the operator
can associate the measurements effected in a room with a
given value of the parameter PLA. In this way different
value of the parameter PLA will correspond to different
rooms.
3. Press
the
SAVE key again, the instrument emits two sound signals
confirming that the test results have been stored.
Press RCL/ESC key at any time to leave the memory menu and go
back to the measurement selected.
Number of the memory location in which the
measurement results will be stored.
Value of the parameter PLA related to the
measurement to be saved.
SAVE
SAVE
S▲
U
L
▼
RCL
ESC