KYORITSU 3127 - Manual (Page 32)

－ 29 －
(1) Setting items
Setting items for DD measurement are as follows.
(For DD measurement, 250V cannot be set at 500V (250V) Range.)
* Step time : Measurement duration per step.
* Breakdown/ Burn : Either Breakdown or Burn mode is selectable.
(2) Setting procedures
Follow the procedures below.
[Stand-by state]
ENTER button( )
Setting of Step time (with UP/DOWN button( ))
ENTER button( )
Setting of Breakdown/Burn (with UP/DOWN button( ))
ENTER button( )
Setting is finished.
Resistance value
Discharge current or
Capacitance (switchable with
UP/DOWN button
)
DD or Voltage value
(switchable with UP/DOWN button
)
Time when
a test ends
Output voltage
DD Measurement Result