KYORITSU 3127 - Manual (Page 54)

－ 51 －
11.Accessories
11-1 Metal parts for Line Probe, and replacement
# DANGER
In the electrical environment of CAT.II or higher, MODEL8255 should be attached
and used with the test lead. With the large exposed metal parts of MODEL8254
and 8019, the equipment under test may be shorted. It may result in failure of
the equipment under test and cause fire or lead to fatal or serious injury.
(1) Tip metal parts
MODEL8255: Standard Prod (straight type, with molded parts)
MODEL8254: Straight Type Prod
MODEL8019: Pickel Type Prod
To be used to hook the instrument.
(2) How to replace it
Turn the Line probe counterclockwise to remove the attached tip metal. Put
the tip metal you want to use to the hexagon socket and turn it to clockwise
together with the tip of probe, and tight up screws.
MODEL8255
Male Screw
Hexagon Socket
MODEL8019
MODEL8254