KYORITSU 6201A - Manual (Page 27)

— 25 —
# WARNING
• Be sure to remove mains cord from the instrument before replacing fuse.
• The fuse that user can replace is this fuse only. Never attempt to
perform the other repairing.
# CAUTION
• Please use the specified fuse (Fast acting type ceramic fuse:
600V/10A - Φ6.3x32mm).
• For the specified fuse, purchase it by yourself or order it from our agency.
8. Services
If this instrument should fail to operate correctly, return it to your distributor.
Please remember to give all the information possible concerning the nature of
the fault, as this will mean that the instrument will be serviced and returned
to you more quickly.
9. Case and strap assembly
Strap belt and probe case can be attached to the instrument as below.
Pass the strap belt down through the side panel of the main body from the
top, and up through the slots of the probe form the bottom. (Fig. 16).
Pass the strap through the buckle, adjust the strap for length and secure.
Fig. 16