KYORITSU 6201A - Manual (Page 3)

— 1 —
1. Safe testing
Electricity is dangerous and can cause injury and death. Always treat it with
the greatest of respect and care. If you are not quite sure how to proceed,
stop a measurement and take advice from a qualified person.
This instruction manual contains warning and safety rules which must be
observed by the user to ensure safe operation of the instrument and retain it
in safe condition. Therefore, read through these operating instructions before
using the instrument.
IMPORTANT:
This instrument must only be used by a competent and trained person and
operated in strict accordance with the instructions.
KYORITSU will not accept liability for any damage or injury caused by misuse
or non-compliance with the instructions or with the safety procedures.
It is essential to read and to understand the safety rules contained in the
instructions or with the safety procedures.
The symbol # indicated on the instrument means that the user must refer to
the related sections in the manual for safe operation of the instrument.
Be sure to carefully read instructions following each symbol # in this manual.
# DANGER is reserved for conditions and actions that are likely to
cause serious or fatal injury.
#  WARNING is reserved for conditions and actions that can cause
serious or fatal injury.
#  CAUTION is reserved for conditions and actions that cancause minor
injury or instrument damage.