Revo R16/8/4/DVR User Manual
Page 12
User’s Manual
6
Connector Pin Outs:
Master Unit
Slave Unit
RX+/TX+ → To → TX+/RX+
RX-/TX- → To → TX-/RX-
Connecting Audio
NOTE: It is the user’s responsibility to determine if local laws and regulations permit recording audio.
Connect Audio Out to your amplifier using the RCA jack. Connect the audio sources to the audio input connector of the
observation cameras that are connected to the modular RJ-12 connectors of the DVR. Refer to the observation camera
manual for configuring the Audio In connection. Your DVR can record audio from up to four sources. When installing
more than four observation cameras, only audio sources from cameras connected to the RJ-12 Video In 1, Video In 2,
Video In 3 and Video In 4 connectors will be recorded.
Connecting the Power Cord
Connect the AC power cord to the DVR and then to a wall outlet.
WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD. MAKE
CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE.
DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR POWER OUTLET DOES NOT HAVE
A GROUNDING PIN RECEPTACLE, DO NOT MODIFY THE PLUG. DO NOT OVERLOAD THE
CIRCUIT BY PLUGGING TOO MANY DEVICES IN TO ONE CIRCUIT.