Revo R16/8/4/DVR - Manual (Page 34)

User’s Manual
28
NOTE: Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence
monitoring should be selected in the Display setup screen (Main Monitor tab).
Camera Menu
Selecting the
(Camera Menu) icon displays the following Camera Menu.
y PTZ: Selecting PTZ and choosing the camera number allows you to control the selected camera as long as it has
Pan, Tilt and Zoom capabilities. Selecting PTZ is the same as pressing the PTZ button on the remote control. See
the following PTZ Mode section for details.
y Zoom: Selecting Zoom and choosing the camera number zooms the current image of the selected camera on the
screen . Selecting Zoom is the same as pressing the ZOOM button on the remote control. For a few seconds after
selecting Zoom, a PIP displays. Inside the PIP, a rectangle shows the area that is enlarged. You can move the rectangle
around using the arrow buttons on the remote control. Pressing the
button on the remote control enlarges the area.
Selecting the (Exit) icon at the top of the screen by pressing the MENU button on the remote control exits the
Zoom mode. You also can exit the Zoom mode by pressing the ZOOM button on the remote control. While in the
Zoom mode, the icon displays in bottom-left corner if Zoom is selected in the Display setup screen (OSD tab).
y Audio: Selecting Audio while in the full-screen mode toggles playing live audio On and Off. While playing live
audio, the icon displays on the camera screen if Audio is selected in the Display setup screen (OSD tab).
y Color Control: Selecting Color Control and choosing the camera number displays an image adjustment dialog.
Selecting Color Control and choosing the camera number is the same as pressing and holding a camera button on
the remote control for a few seconds. You can control brightness, contrast, hue and saturation for each camera.
NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to making any image
adjustments using the DVR’s controls.
NOTE: Any image adjustments you make will be applied to both the live video on the monitors and the recorded
video.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on each camera screen.
y Edit Group: Supports the active cameo function. Select Edit Group and choose a camera that you
want to change display position (e.g., Camera A). Then, click the right mouse button to display the
menu. If you choose another camera in the menu (e.g., Camera B), the screen displays Camera B
instead of Camera A. Clicking the right mouse button and selecting Exit Group Edit in the menu exits
the Active Cameo mode. See the following Active Cameo Mode section for details.
Alarm Off
Selecting the
(Alarm Off) icon resets the DVR’s outputs including the internal buzzer during an alarm. Selecting
the icon is the same as pressing the ALARM button on the remote control.
Setup
Selecting the
(Setup) icon enters the Main Setup screen.
Search Mode
Selecting the
(Search Mode) icon exits the Live Monitoring mode and enters the Search mode.