Revo R16/8/4/DVR - Manual (Page 70)

User’s Manual
14
System 1: Set up the date/time format for RASplus, display option, and panic recording function.
y Date/Time Format: Set the date/time format.
y Display Option: Set up the screen display, drag & drop popup option, display acceleration and OSD.
– Screen Option: Select Watch Screen to use the screen for live monitoring only, Search Screen to use the
screen for search only, or Watch and Search Screen to use the screen for both live monitoring and searching.
Selecting Hide the Message Box hides the message box that displays the status information about RASplus
and remote site connections.
– Drag & Drop Popup Option: Select which mouse button will be used when displaying popup menu screens
from Use Left Mouse Button, Use Right Mouse Button or both (Watch and Search Screen mode only).
– Drawing Mode Setup…: Set up the display options for the screen.
y Normal Drawing: Depends on your PC’s CPU performance and displays images
in low speed (DIB Draw Mode).
y Fast Drawing (Default): Displays image in normal speed (Direct Draw Mode).
y Fast Drawing (YUV420/RGB32): Depends on your PC’s video card performance
and displays images in high speed (Direct Draw Mode).
y Overlay (YUV420/RGB32/RGB565): Displays image in high speed (Direct
Draw Overlay Mode).
y Deinterlacing: Set up the deinterlace filter. Using a deinterlace filter for interlaced
video enhances image display quality by eliminating horizontal scan lines and
noise in areas with motion.
y Aspect Ratio: Set up the image aspect ratio displayed on the screen. Selecting
Fit to Screen displays images by fitting them to the screen size, and selecting
Original Ratio displays images by fitting them within the screen size while
maintaining their original ratio.
y Anti-Aliasing Screen: Set up the Anti-Aliasing Screen option. When using the
Anti-Aliasing Screen option, the image display quality on the screen will be
enhanced by eliminating stair-stepping (aliasing) effects in the enlarged image.
NOTE: If the image cannot be displayed properly because of your PC’s specifications, lower the drawing mode level.
NOTE: While in the Fast Drawing mode, the drawing speed might decrease when the RASplus screen is not
located on the primary monitor.
NOTE: Overlay drawing mode may not be supported, depending on the type of video card installed in your PC.
Video cards with an ATI chipset are recommended.
NOTE: When using dual monitors, selecting Overlay drawing will display the image only on the primary monitor.
NOTE: When using a low-end computer, image drawing speed might decrease while using a deinterlacing filter
depending on the type of deinterlacing filter.
NOTE: When using a low-end computer, image drawing speed might decrease when the Anti-Aliasing Screen
option is selected.
– OSD Setup…: Select options to display on the screen.
y Recording Setup: Set up the Use (On or Off) of the panic recording function and overwriting option of the recording
folder (On or Off). When using the panic recording function and overwriting option, RASplus continues recording
when the hard disk drive is full by overwriting the oldest video. Designate a recording folder path and set the
recording folder size from 640MB to 2,048MB. Capacity shows the remaining space of the recording folder.
NOTE: The recording folder size cannot be changed once it has been set. Designate another recording folder
path if you want to expand the recording space.
– Recording Mode Setup…: Set up the panic recording mode.