Revo R16/8/4/DVR - Manual (Page 39)

Digital Video Recorder
33
Search Filter
Go To
Clip-Copy
Camera Menu
Alarm Off
Exit
NOTE: The menu icons also can be displayed by moving the mouse pointer to the top of the screen.
Search Filter: Selects video from the event log, searches using a recording table or searches motion events
(see below for more details).
Go To: Displays the first or last recorded image, or searches by date and time (see below for more details).
Clip-Copy: Copies a video segment and saves it (see below for more details).
Camera Menu
y Zoom: Selecting Zoom and choosing the camera number zooms the current playback image of the selected camera
on the screen. Selecting the (Exit) icon at the top of the screen by pressing the MENU button on the remote control
or moving the mouse pointer to the top of the screen exits the Zoom mode. While in the Zoom mode, the icon
displays on the camera screen if Zoom is selected in the Display setup screen (OSD tab).
y Audio: Selecting Audio while in the full-screen mode toggles playing recorded audio On and Off. While playing
recorded audio, the icon displays on the camera screen if Audio is selected in the Display setup screen (OSD tab).
y Use De-Interlace: Selecting Use De-Interlace while in the full-screen mode turns the de-interlace filter on.
NOTE: The video signal has a time difference of 1/60 second between odd and even fields because it is
composed of 60 interlaced fields per second. When recording video with Very High (D1) resolution, video is
made up of frame units combining two fields – one odd field and one even field. This can cause horizontal
scan lines or flashes in areas with motion because of the time difference between the two fields. Turning on
the de-interlace filter provides clearer video by eliminating these horizontal scan lines and flashes.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on each camera screen.
y Edit Group: Selecting Edit Group supports the active cameo function. Select Edit Group and
choose a camera that you want to change the display position (e.g., Camera A). Then, click the right
mouse button to display the menu. If you choose another camera in the menu (e.g., Camera B),
the screen displays Camera B instead of Camera A. Clicking the right mouse button and selecting
Exit Group Edit in the menu exits the Active Cameo mode.
Alarm Off: Resets the DVR’s outputs including the internal buzzer during an alarm. Selecting the icon is
the same as pressing the ALARM button on the remote control.
Exit: Exits the Search mode and enters the Live Monitoring mode.