Revo R16/8/4/DVR - Manual (Page 73)

Remote Administration System Plus (RASplus)
17
y Add: Click the Add button and enter the information about the remote site you want to add.
– Reference Group: The site should be assigned to a Reference
Group for effective management of multiple remote sites. Click
the Add button to create a new reference group.
– Remote Site Setup: Enter a site name and the IP address of the
remote site (modem telephone number for dial-up connections),
acquired from your network administrator. Click the Port… button
to set up the IP port number of each program. The IP port number
should match the value set during the network setup of the remote
DVR. If the remote DVR version does not allow you to set the
IP port numbers, use the following values: “8200” for Admin,
“8016” for Watch, “10019” for Search, and “8116” for Audio.
Select the number of cameras at the remote site. For example,
selecting “8” from the list when registering a 16-channel DVR
displays video of the first 8 channels on the screen.
NOTE: When using DVRNS server, place a checkmark in the Use
DVRNS box, and enter the site name and DVR name of the remote
site in the IP address box. The DVR name you enter should match
the DVR name set during the DVRNS setup of the remote DVR.
– Login Setup: Enter the user ID and password of the remote site to be accessed. If you have entered a user ID
and a password, the site will be connected automatically without a dialog box requesting a password. Select No
Password for remote systems that do not require a password (e.g., guest login).
NOTE: Up to 32 characters may be used for the site names, telephone numbers and user IDs, and up to 10
characters may be used for passwords.
– Emergency Event Instruction: Enter the message to display when emergency events are called in from the remote
site. The Emergency Event Instruction can be checked by clicking the right mouse button after selecting the event
or the site from the list in the Emergency Event panel. (REVO PRO Model Only)
y Change: Select the group or site you want to change and click the Change button, or double click the group or the
site to change. Then, edit the site information.
y Remove: Select the group or site you want to remove and click the Remove button.
y List All: Displays all registered remote sites.
y Find: Enter the group name or site name to search for and click the Find button to display the matching groups or
sites in the list.