Revo R16/8/4/DVR - Manual (Page 17)

Digital Video Recorder
11
While setting up the DVR, there will be many opportunities to enter names and titles. When making these entries, a
Virtual Keyboard will appear.
Use the arrow buttons on the remote control to highlight the character you want
in the name or title and press the
button. That character appears in the title
bar and the cursor moves to the next position. Selecting toggles between the
upper and lower case keyboards, backspaces, and deletes entered characters.
You can use up to 31 characters including spaces in your title.
BASIC SETUP WIZARD
When you turn the system on for the first time, the Basic Setup Wizard will run. The Basic Setup Wizard guides you
to configure the system for basic operation. The wizard also can be accessed by selecting the icon in the Setup screen.
Refer to the following Main Setup section.
Select the Next button to start the Basic Setup Wizard.
NOTE: Selecting the Cancel button throughout the screens
exits the Basic Setup Wizard without saving your changes
and return to the Live Monitoring mode.
Date/Time Setup
y Date: Set the system date and select the date format.
y Time: Set the system time and select the time format.
y Time Zone: Select your time zone.
y Enable Daylight Saving Time: Selecting the box sets the
system to use daylight saving time.
NOTE: The Date/Time will be set, and the clock will start when
you click the Next button.
Record Method Setup
y Select the desired recording mode from:
– Motion Event Record (Recommended)
– Continuous & Motion Event Record
– Continuous Record
NOTE: You should understand each recording mode before
selecting the DVR’s recording method.